TF1
Inductive linear position transducers a profile design
Absolute position transducers for high dynamic positioning tasks. Inductive measurement principle, touchless position detection with free position markers; unlimited mechanical life
Technical information and variants
Interface
Application range
Max. measurement range
Protection rating
Temperature
Data sheet
Note
CANopen
1,000 mm
IP67
-40 °C to 75 °C
IO-Link
1,000 mm
IP67
-40 °C to 85 °C
Voltage
1,000 mm
IP67
-40 °C to 85 °C
Current
1,000 mm
IP67
-40 °C to 85 °C
SSI
1,000 mm
IP67
-40 °C to 85 °C
CAD models
Data sheets
Instructions for use
Drawings
Electronic data sheets
Brochures
Declarations of conformity / certificates
MTTF Certificates
Suitable for highly dynamic positioning tasks
Thanks to its exceptionally good dynamic behavior, the new linear sensor is suitable for very fast positioning tasks. The update rate of the measuring system reaches 10 kHz with a very low tracking error. Thanks to the optimized control dynamics, there is no overshoot even with rapid changes in movement. The sensor works with a resolution of less than 1 μm.
Insensitive to magnetic fields
Novopad inductive technology is immune to magnetic fields generated, for example, by large motors, hydraulic valves, or frequency converters, because the position is Position marker inductively rather than via a magnetic Position marker . Another advantage is that metal shavings cannot accumulate on the non-magnetic position sensor.
No impairment due to vibrations and shocks
Due to the robust design - the measuring scale is realized via a printed circuit board - and the offset-tolerant inductive transmission, the Novopad technology is particularly suitable for use in vibration-loaded applications. The sensor accuracy and the output signal are not affected by these disturbances.
The right communication
The measurement signal is output as Current analog Current, or digitally via SSI, IO-Link, or CANopen; Ethernet interfaces are currently in the planning stages. In the analog version, a teach function allows for the calibration of the start and end positions as well as direction reversal.
The first choice for many applications
Typical applications include linear drives, injection molding and die casting machines, presses and punches in sheet metal processing, packaging or woodworking machines or position detection on fast motion units in production lines.
Select the type of accessory
Accessories
Below you have the option of selecting suitable accessories to complement your order perfectly. Everything you need is included.
EEM 33–35/36/37
Connector, 4-pin, straight, unshielded, with cable
IO-Linkanalog Mobile
EEM 33–38/39/40
Connector, 4-pin, angled, unshielded, with cable
IO-Linkanalog Mobile
EEM 33–52
5-pin connector, straight, shielded, with cable
CANopenCAN SAE J1939
EEM 33-41/43
Connector, 4-pin, angled, unshielded, with cable
CANopenCAN SAE J1939
EEM 33-49/50/51
5-pin connector, straight, shielded, with cable
CANopenCAN SAE J1939
EEM 33-73
M12x1 connector, 5-pin, straight, A-coded, with cap nut, screw terminal connection, IP67, shieldable
CANopenCAN SAE J1939
EEM 33–75
M12x1 connector, 5-pin, angled, A-coded, with cap nut, screw terminal connection, IP67, shieldable, contact insert can be rotated in 90° increments.
CANopenCAN SAE J1939
EEM 33–45
Dual distributor, 5-pin, A-coded, 1:1 wiring
CANopenCAN SAE J1939
EEM 33-87/91/93
M12x1 connector, 8-pin, right-angle, A-coded, with molded cable, shielded, IP67, open end
Z-TF1-P03
Guided Position marker a swivel joint for linear position transducers a profile design
TF1
Z-TF1-P02
Guided Position marker axial joint for linear position transducers a profile design
TF1
Z-TF1-P01
Free Position marker linear position transducers a profile design
TF1
Z-TP1-S01
Push rod for guided Position marker and Z-TLM-P05
TF1TP1
Complete Catalog
Discover the complete Novotechnik product portfolio in our comprehensive catalog. All sensor solutions, technical data, and product overviews are conveniently summarized for you.
Industries
Find out in which industries our displacement and angle sensors are used worldwide and discover the right solution for your application.
Consulting
Take advantage of our personalized consultation and technical expertise. We’ll guide you every step of the way, from the initial idea to successful implementation.
We are happy to be there for you
Contact.
* Mandatory field